nomadman
10-13-2004, 06:20 PM
4X4 K5 Stuff
Gas tank (replacement) for carb motor, w/ filler, no sending unit - $20
Crossmember w/ skidplate from ’86 w/ NP208 - $20
Skidplate from ’86 w/ NP208 – no crossmenber - $10
NP 208 T/C w/ new chain - $150
T/C to trans brace - $10
Turbo 700R4 w/ adapter for NP208 – needs rebuild - $75
Motor mount cups w/ braces to bellhousing cover - $15
Cast aluminum bellhousing cover - $20
Pair 10 bolt axles from ’87 K5 (28spline) I need to check ratio- $150
Pair 10 bolt axles from ’90 K5 (30spline) I need to check ratio - $250
OEM aluminum 8 hole wheels (2) sets both need refinishing - $75 set
4WD PS box & pump (2) available, one needs seals - $50/$100
Fan shroud (2 piece) complete - $15
Fan shroud (2 piece) upper half only - $5
Seat belt retractors, blue - $20
Sliding tinted windows for F/G hardtop - $50
Power brake booster w/ master cylinder and proportioning valve (2) available - $25
Custom made softtop w/ F/G bows. Snaps need to be screwed to 1/4 panels, roof and tailgate. Vinyl got somewhat stretched out of shape from ice sitting on it during last winter. No reasonable offer refused.
2X4 Pickup stuff
2WD PS box & pump – good for X-over conversion - $75
Gas tank (replacement) for carb motor w/ filler & sending unit - $40
Turbo 350 longshaft w/ TC – strong shifts - $100
Front 2x4 leaf spring mounts – good for 4x4 shackle flip - $30/pr
P255x70-15 all season tires on 5 lug Chevy truck rally rims – no caps/rings, exc. cond. - $175
Fan shroud (2 piece) complete (shorter radiator than K5) - $15
Rear springs, 4 leaf - $40
Class III receiver sold by U-Haul only 6 months old - $50
Generic Chevy truck stuff
Tilt column complete - $75
A/C system missing compressor and condenser - $100
TBI system from 350 needs only distributor and coil - $250
Edelbrock Permformer aluminum 4 bbl intake (3) available, glass bead blasted - $100 ea
Edelbrock carburetor (2) available – $150 ea
HEI distributor (2) available, vac adv - $50, elec adv - $50
Rear bumper (2) available – 1 w/ trim, 1 w/o trim - $20 ea
Front bumperettes - $20
Dash cluster from an ’86 all gages work - $15
SS mirrors - $20/pr
Dash pad, grey, some cracks but seen worse - $15
Hoods (1) no dents/rust - $40, (1) no rust, minor dents - $free
Core supports – (1) single head light, (1) double, surf. rust only $30 ea
I will ship anything anywhere at your expense, local pickup always welcome. Prices are negotiable within reason. Trades considered. Thanks for looking. /forums/images/graemlins/usaflag.gif
Gas tank (replacement) for carb motor, w/ filler, no sending unit - $20
Crossmember w/ skidplate from ’86 w/ NP208 - $20
Skidplate from ’86 w/ NP208 – no crossmenber - $10
NP 208 T/C w/ new chain - $150
T/C to trans brace - $10
Turbo 700R4 w/ adapter for NP208 – needs rebuild - $75
Motor mount cups w/ braces to bellhousing cover - $15
Cast aluminum bellhousing cover - $20
Pair 10 bolt axles from ’87 K5 (28spline) I need to check ratio- $150
Pair 10 bolt axles from ’90 K5 (30spline) I need to check ratio - $250
OEM aluminum 8 hole wheels (2) sets both need refinishing - $75 set
4WD PS box & pump (2) available, one needs seals - $50/$100
Fan shroud (2 piece) complete - $15
Fan shroud (2 piece) upper half only - $5
Seat belt retractors, blue - $20
Sliding tinted windows for F/G hardtop - $50
Power brake booster w/ master cylinder and proportioning valve (2) available - $25
Custom made softtop w/ F/G bows. Snaps need to be screwed to 1/4 panels, roof and tailgate. Vinyl got somewhat stretched out of shape from ice sitting on it during last winter. No reasonable offer refused.
2X4 Pickup stuff
2WD PS box & pump – good for X-over conversion - $75
Gas tank (replacement) for carb motor w/ filler & sending unit - $40
Turbo 350 longshaft w/ TC – strong shifts - $100
Front 2x4 leaf spring mounts – good for 4x4 shackle flip - $30/pr
P255x70-15 all season tires on 5 lug Chevy truck rally rims – no caps/rings, exc. cond. - $175
Fan shroud (2 piece) complete (shorter radiator than K5) - $15
Rear springs, 4 leaf - $40
Class III receiver sold by U-Haul only 6 months old - $50
Generic Chevy truck stuff
Tilt column complete - $75
A/C system missing compressor and condenser - $100
TBI system from 350 needs only distributor and coil - $250
Edelbrock Permformer aluminum 4 bbl intake (3) available, glass bead blasted - $100 ea
Edelbrock carburetor (2) available – $150 ea
HEI distributor (2) available, vac adv - $50, elec adv - $50
Rear bumper (2) available – 1 w/ trim, 1 w/o trim - $20 ea
Front bumperettes - $20
Dash cluster from an ’86 all gages work - $15
SS mirrors - $20/pr
Dash pad, grey, some cracks but seen worse - $15
Hoods (1) no dents/rust - $40, (1) no rust, minor dents - $free
Core supports – (1) single head light, (1) double, surf. rust only $30 ea
I will ship anything anywhere at your expense, local pickup always welcome. Prices are negotiable within reason. Trades considered. Thanks for looking. /forums/images/graemlins/usaflag.gif