CK5 - The Full-Size GM Off Road Community

Here is the new front winch tube bumper with recovery points, light and blinker tabs, plus a skid plate. Not shown with clevis tabs or rollerfairlead plate. These bumpers will fit 73-91' fullsize models. Completely bolt on with 1/2 inch grade 8 bolts or optional 9/16" bolts (holes need to be drilled one size bigger)



Different options can be worked out for winch, stinger hoop, light and blinker tab placement.


Thanks
Jesse

That thing is sweet, i like the low stealthish design. What does one of those bmpers run for?

Looks good, can you make one to hold the Warn 8274 winch?

k5 crawler 50: $469 plus the ride as is

cgusman: yes

Thanks
Jesse

Anything in the works for a 1st gen? :wink1:

No not yet, but I'm building a slightly different front bumper too. I am also working on a design for a rear spare tire carrier, jerry can, hi-lift, setup. Plus new sliders with steps will be available for 73'-91' burbs and K5's.

A soon as I can get my hands on a first gen I will get something rolling.

Jesse Kruger

I saw Dominics rear bumper that you made for his Suburban when we went wheeling.

Very nice work. Nice welds and beefy! Very beefy. :bow:

I'll be in touch. :D

Thanks Jesse, that rear tire carrier setup sounds good too. My wife is gonna get real pissed if I throw that 42 in her lap :haha: Those of us with 1st gens are anxiously awaiting :D

Got my front bumper yesterday. very nice. Now I just need to paint it and get pictures. We had a problem with the freight companey trying to rip us off, but got that taken care of.


:bow:Thanks again Jesse:bow:


Pics will come soon.

would like to know if one of those can be made to fit a warn 16.5ti one of your front bumpers is my next big planned cash dishout ;p if it can fit that winch

Sure no problem! Send me a PM or give me a call and we can set things up when your ready.

Jesse

Do you have any pictures elsewhere I can access? I'm still a "non-member" and can't see them due to restrictions. :doah:

Do you have any pictures elsewhere I can access? I'm still a "non-member" and can't see them due to restrictions. :doah:
Go to the site BlazenOffroad.com

Thanks badfish!

My site has not ben updated in a while. You can also give me your email, or email me thru my site and I will send you some pictures too!

Jesse

NP Jesse!
I am going to order your frnt & rr bumpers after i get my tires :D
Should be around Jan.06

Do you have any pictures elsewhere I can access? I'm still a "non-member" and can't see them due to restrictions. :doah:

Here is a pic of the front bumper he made me, setup to mount a Warn 8274 winch.

http://www.spingcreekoffroad.com/albums/album05/Bumper_010.jpg

I will get some more pics, after I do some mods to it.

That is a sweet ass bumper :bow:
Cant wait to get mine :D

ill be ordering one too, after my tires as well, prolly janurary or feburary :D

Sweet! Just let me know when the time comes. :D

Jesse

very well designed. I like how its low and stealthy and yet the way to corners come together they provide some protection for the outside corners. Nice!

j

Thanks Jekbrown :D

anxiously awaiting a rear bumper witha rack!!!

I'm working on a rear spare tire carrier bumper right now, It's almost ready for install too. :D


Jesse

mehhhhhh that pic makes me go look for a job so i can get one haha

heres some updated pics

Tax returns are coming................

How much would freight be to 92065 on this front bumper? Does it come painted or bare?

sent you a PM

for any one that is curious our freight averages 110-230 the closer you get to the east coast the closer the freight moves to 200+

Its also easy to put multiple bumpers and sliders, etc. on one pallet for about the same price as one bumper.

Thanks
Jesse

Last call for spring bumpers before June......



Thanks,
Jesse

i love that red one! how much does that go for? what size winch can it take? shipping to 22039 (im guessing $$$$ :( )

Check my website for Prices!!!!!!

Any winch you want, custom built for your specs. Body lift? No problem!




Jesse

Thanks again everyone

can you send me a quote for the one on the red k5 shipped to 22029 please. i deleted the pm you sent from a while ago. thanks :)

Keep the orders coming everyone!


Thanks,
Jesse Kruger
www.blazenoffroad.com (http://www.blazenoffroad.com)
sales@blazenoffroad.com
530-416-7902

Jesse,

Was everything successful with the move? I am hoping so and that maybe you have given some thought to the fold up tire carrier. Still loving the front you made for me.:D

Yes everything has gone smoothly...thanks.

And yes I am working on the new tire carrier, I'll get back to you soon with more info.

Good to hear about the bumper, everyone loves your bumper, especially your color theme.

Keep em coming :)

Wow! Keep those orders coming, the response on these has been incredible.

Fast turn around time too!


Oh ya new plate style bumpers coming in 2007.

Wow! Keep those orders coming, the response on these has been incredible.

Fast turn around time too!


Oh ya new plate style bumpers coming in 2007.

plate style bumpers?

Yes for those who don't like the tube style!

:D :rolleyes:
http://www.blazenoffroad.com/Images/ward%20bumper%201.jpg

http://www.blazenoffroad.com/Images/Bill%20bowling%20bumper%20sliders2.jpg

Just the vendor that I have been looking for!

Can i get a quote for a front winch bumper with a fairlead and shackles (3rd pic down on the winch bumper page), a rear tube bumper with reciver hitch mount and shackles, and a set of bolt on rock sliders for a chevy k-10 shipped to 96740. Its probally going to be alot cheaper if I pick up at the terminal. The two terminals on the island are Hilo and Kawaihae. Which ever one is cheapest works for me.

Also, does the rear bumper bolt to the frame or do I have to reuse any of the stock mounting brackets? Thank you!!!!!

PM sent.

Bump for the Big Island, Thanks!

Thanks again!

Tax Season is here!

Tax Season is here!Can you fab the simplest front guard, in Aluminum?

No we are not setup for Aluminum, Sorry!

Wow keep em coming, off to a good new year!

Wow! Orders have been pouring in and bumpers flying out of the shop, these bumpers are HOT!

Order today and receive your bumper in less than 2 weeks!

Don't forget they are on sale.


Jesse

Here is one on a 77'

WHat's the sale? Or did I miss it?

Sale is over, sorry should have acted sooner.

any plans for a version thats for newer rigs? I need bumpers for my 96 suburban.

Definately plans in the future!

do you need a rig to build them to? might be able to offer mine. I like the tube front winch, and rear winch bumper with tire carrier.

does the bumper come stock with that plate on the stinger?
how far does the front stinger stick out?

Plate on the stinger? Cgusman put an extra plate on his stinger hoop at the top.

All of the bumpers come with the roller/fairlead plate below the stinger.

We can make the stinger however you like it, taller, shorter, etc. A majority of them are only angled out 10-15 degrees. BUt if you want more or less no problem.

Jesse

I was wondering if you had any more pics of your bumper
from different angles and close ups :)

I really like your bumper

I was wondering if you had any more pics of your bumper
from different angles and close ups :)

I really like your bumper

Are you refering to the tube bumper ( black one with warn rockcrawler winch?)

Or the plate bumper?

Are you refering to the tube bumper ( black one with warn rockcrawler winch?)

Or the plate bumper?
sorry, the tube one
whats the major differences between
the red and black bumper? are they set up for different winches?
I'm leaning toward the one without the fair lead plate

I would love to see them from all angles and close ups
if it wouldnt be to much of a hassle

thanks a lot :waytogo:

http://coloradok5.com/forums/attachment.php?attachmentid=40325&stc=1&thumb=1&d=1171344936

http://coloradok5.com/forums/attachment.php?attachmentid=40327&stc=1&thumb=1&d=1171344988

Are thicker clevis mounts available?

Well actually yes, we have some laser cut 1" thick clevis mounts now!

Awesome bumper! Perfect fit, tight to frame rails, bolt holes aligned perfectly. Looks great! I need my step daughter to help me get some pics loaded and on line. Just got it back from powder coating and had it mounted in an hour! Can't wait to rub it on something. Excellent service, Thanks.

Can't wait to rub it on something.

:haha: :haha: :haha:
That should have been the first thing you did when it came back.

Later this summer I should be ordering a bumper like the red one on Bulldogk5's truck. Do you have any pics or measurements of where it mounts to the front frame horn? I am using the Diy4x B-52 spring mounts and they only leave about 5"~6" to mount a bumper so I want to make sure I wont have any mounting issues on my non-standard set up. Also, would it be possible to mount the bumper to the inside of the frame rail instead of the outside? :thinking:

I don't know if this helps, but my bumper attached in the same frame holes as the original bumper did. Everything fit perfect. I will try to post pics when my step-daughter gets home.

Cool, thanks!

Jesse, any thoughts on mounting it on the inboard side of the frame rails?

John, I don't know if you can tell from the photo, but the sides where the skid plate attaches are the mounting surfaces to the frame. This is what gives the strength to the winch plate area I think. Doesn't mean he can't do it but i think it would be a big redesign to have the rigidity needed. That is my daughter getting ready to show me the finer points on where and how to attach a winch cable or strap.:haha:

http://coloradok5.com/photos/data/500/ME_ready_to_work.jpg

http://coloradok5.com/photos/data/500/ME_hanging_on.jpg

Hey Jesse, finally figure out how to post pics. I know the light placements are a little odd, but I needed to open up my line of sight by lowering the upper Dayliters, and I still need to do something about about the lower Hilites acting as my deer stoppers, but I love the bumper! Thanks again for the service and professionalism! Great product, can't wait to do something with a rear bumper!48561

48562

48563

48564

Looks good. I like the lights mounted inside the upper hoop like that. Been thinking that's how I will hook up the wide beams when I get them.

Nice collection of trucks too.

THanks. The yellow one is all 1 ton. 454,465,205 60,14ff. Locked at both ends with 560+ hp. Way too much fun but drove it like an idiot on the road so It is being dismantled to increase my chances of survival. The blue and black is a DD and for mild trails. Would like to maybe go with a 14sf 6-lug for the rear. The black one is parts truck from my brother UDY. It looks to me like you have a pretty nice collection yourself

John, I don't know if you can tell from the photo, but the sides where the skid plate attaches are the mounting surfaces to the frame. This is what gives the strength to the winch plate area I think. Doesn't mean he can't do it but i think it would be a big redesign to have the rigidity needed. That is my daughter getting ready to show me the finer points on where and how to attach a winch cable or strap.:haha:

http://coloradok5.com/photos/data/500/ME_ready_to_work.jpg

http://coloradok5.com/photos/data/500/ME_hanging_on.jpg



Man that is cute!

Ward we have a tire carrier waiting for you..........:rolleyes:

Keep em coming!! 4 front bumpers shipping out this week.

PM sent

I usually don't like tube bumpers but the winch plate makes this one right!

Orders are still pouring in!

We are now offering our tube bumpers in DOM as well!

:D

Sorry Freight company is closed today, couple bumpers will ship out next week instead.

Just a few days to get your bumper orders in before the New year!

Few bumpers left in stock!

Few bumpers left in stock!
Did the coupon code expire?I was just trying to order and its said so?
Bumpers,tube sliders and tube doors....oh well.Ill have to think about it(meaning talk to the ol lady :haha:)

How about a tax sale then?I already have mine burning a hole in my pocket.

TAX sale is on!!!!

i want a bumper so bad! ill eventually get one just gatta get my chit together. how long will the sale be going on for?

Some time in Feb.....

i want a bumper so bad! ill eventually get one just gotta get my chit together. how long will the sale be going on for?Hey you pick it up at UPS or where ever and there only $468.And there doors are only $180!!!
I just got a Bumper & tube doors!!! :D:D And as soon as I have a few $ Im getting the rock sliders.
Cant wait till summer no doors no top!!! And I can finally mount the winch I got for LAST X-mas :haha:

Is there a coupon code for the sale or is $468 the sale price?

$468 was my price minus 10%

$468 was my price minus 10%

So $468 - $46.80 + Shipping = New bumper at your house?

Where did the 10% come from?

Send an e-mail to Jesse and work out the details for the exact bumper you want. Or give him a call.

So $468 - $46.80 + Shipping = New bumper at your house?

Where did the 10% come from?
Look ,this is shipped to UPS and I have to go get it.Other wise is like $65 more to your door.


Front winch bumper $469.99
Tube Doors $179.99
Subtotal...................$649.98
Discount 10% -$64.99
Freight $148.94
Total.......................$733.93




PM "81jimmyslt" he will work out any details with you.No lie I must have PMed him 20 or more times.
And at the last min he changed the light mounting for me.Plus made the holes fit MY winch.
He also PMed me the day he got my check,and the day its going to ship.
What more could you ask for.
I think its the best looking and cheapest bumper out there.

Rgr, thanx.

Post up what your looking for and your shipping zip, business or not and I will get you a quote.

Jesse Kruger
530-416-7902

Thanks for the orders! We are about caught up. We got burined in snow.....

First pick is my house after the last big storm a little more than a week ago now. Second pick is a customers driveway which had the snow removed about 7 times already since Late Dec.

The last is a house that collapsed a couple days after the storm..... a few streets over.

My roof was already cleared.

Jesse

That is officially a sh**load of snow. Have fun digging out.:D

That is officially a sh**load of snow. Have fun digging out.:D
That ain't no lie! ! ! ! :eek1:

I was wondering what was taking so long....Now I see ya`ll were buried! ! :eek1:

Bumpers are flying out......


Snow is melting fast!

We have a couple bumpers in stock right now!

Don't forget to do your Taxes.........like you would forget about that guy on your shoulders.

whats everybody doing for license plates? ive gatta have one on the front:mad:, any ideas?

I don't know how well you can see this. Also, it's probably not the smartest way to do this in the rust belt I live in, but I just zip-screwed the plate to the front valence.

Oh yeah, have not had any problems with the police as far as viewability goes.

If you have a roller fairlead they make a license plate mount that sticks to one of the rollers, but needs to be thrown in the glove box when wheeling.

Yeah you could use things from Ace thats for hanging brooms,shovels, and rakes.
Or I`ve seen them for sale online.

I believe the clips that hold a "D" cell Maglite are the same size as a roller on the fairlead. You could use one for each side and it makes an easy on/off.

I believe the clips that hold a "D" cell Maglite are the same size as a roller on the fairlead. You could use one for each side and it makes an easy on/off.
There like 3.50 a pair on Amazon.com too.

Time to get your orders in!!!

Time to get your orders in!!!
Now lets see if I can talk the ol lady out of some of this tax money for some rock sliders and/or some more stuff.LOL I could fill a whole page of stuff I want from Blazen...:rolleyes:

I'm still trying to grow bigger testiclees to explain to my wife why I need a matching rear bumper for my blazer. She just doesn't understand why it's not right that the chrome rear bumper contrasts with the the front Blazen tube bumper in powder coat black.

I'm still trying to grow bigger testiclees to explain to my wife why I need a matching rear bumper for my blazer. She just doesn't understand why it's not right that the chrome rear bumper contrasts with the the front Blazen tube bumper in powder coat black.
Mine gets that its a "guy" thing , she even helps sometimes...she just wants to pay stupid bills and stuff.
Besides this extra tax refund is hers anyway.Since she claimed me and im a lil over 18 I dont get any .

My wife is actually pretty cool about my toys as long as the bills are paid first. She has four horses to my 250hp or so. I don't understand her riding meat, ( unless it's mine), and she won't let me eat any of them, but I do try to buy her a truck load of hay once or twice a year, so she may even ride in my truck once in a while.

Thanks again for the orders

CK5 CK5 CK5

Mine gets that its a "guy" thing , she even helps sometimes...she just wants to pay stupid bills and stuff.
Besides this extra tax refund is hers anyway.Since she claimed me and im a lil over 18 I dont get any .
HEHEHEHE my ol lady said she wants $150 of the tax check and I can HAVE the rest!!! :bow: :D :bow:
And after the drag link , Im thinking ALL greaseable bolts for the leafs and the 4 in the frame , or 12 of them. How much Jesse?( How much for the drag link too? ) AND maybe a rock slider.... :thinking:
There $99 right? :deal:

I'm still trying to grow bigger testiclees to explain to my wife why I need a matching rear bumper for my blazer. She just doesn't understand why it's not right that the chrome rear bumper contrasts with the the front Blazen tube bumper in powder coat black.Mine just shook her head and laughed at me when I said I needed a matching bumper, until I explained how flimsy the stock one is.

Tire carriers have been a popular combo for these Rear bumpers!

No not yet, but I'm building a slightly different front bumper too. I am also working on a design for a rear spare tire carrier, jerry can, hi-lift, setup. Plus new sliders with steps will be available for 73'-91' burbs and K5's.

A soon as I can get my hands on a first gen I will get something rolling.

Jesse Kruger

Ok Jesse so I posted a message in "the garage" and got some response about the Gen I bumper.

I also have a thread in the "trials" section regarding a trip to the Rubicon in August and your thinking you'll go.

I'm willing to provide the Gen I K5. And some help creating the bumper when ever you are. I have the winch currently mounted to a winch plate and some 2" tubing to be used in my hitch receiver but would really like to get that thing mounted to the front where it's supposed to be.

Tire carriers have been a popular combo for these front bumpers!Is this an add on thing?Are we talking the tube winch bumpers like mine?

Plus new sliders with steps will be available for 73'-91' burbs and K5's Oh man I wanna hear more about this..I was this close |-| to buying a DPI slider. I REALLY need a step on mine.

Fixed it..

Couple more bumpers going out tomorrow.

just curious bout the progress of my bumper...i'll send u a pm...

All bumpers have been shipped!!

Time to get your orders in!

And if you win the free bumper give-a-away we will credit your purchase if need be or build you a rear bumper.

heres mine...
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=586
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=585
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=587
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=588
now all i need to do is install it, take it back off, send it to be powdercoated, then re-install it, put the winch on and show you guys some "action" pics...

You dont need to bother installing or powder coating, just send it to Joe Choat Carson City NV 89701

sure...just send $$$$$$$$$$$$$$$$$$ :eek1::D:haha:

here ya go...
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=593
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=596
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=595
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=594
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=592
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=591

SWEET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!What color are you going with?

thanks...haven't quite decided yet...black, brown(to match interior) of whatever color i decide to paint the truck...i bought a gallon of dark gray tractor paint to paint the "new" fenders I'm putting on, but don't think they'll go well with the tan/brown interior too well...i am leaning towards dark green tho...or maybe olive drab...who knows...going back to work outside of Houston next week so who knows when i'll get back hm to work on it...I'm fixing to start my busy season and don't usually have time off til Thanksgiving then again @ Christmas...

there are a couple of issues i ran into trying to install everything but they are very minor and they're something i can fix so its no big deal...

heres one more...
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=599

Looks good.:waytogo:

Just so everone knows, I did not have to remove the fenders and grill to mount mine.:D :haha:

oh...low blo...actually, i removed passenger fender and grille prior to getting the bumper in...during install of the bumper, i realized PO chopped some of the front frame rail off and rigged up an bumper lift bracket:doah:...the bumper is to close to everything up front...i'll have to get some channel and add it to the frame to extend the bumper out...it'll b fun for sure...:hack::grind::weld::crazy:

Ah, I knew you were replacing the fenders. Just thought I'd burn ya.:D

it did gone on easier w/o the extra crap in the way :D...had to do a little re-mod on the mounting holes for the winch and fair-lead...gonna b a while b4 i do anything else tho...

and heres one more w/roller installed...
http://coloradok5.com/forums/picture.php?albumid=57&pictureid=602

Here's my new bumper recently installed. My Warn 8200 or 5687 old ass heavy sum a bitch just barely squezed in there!

Great work, thanks Jesse!

http://i213.photobucket.com/albums/cc240/kot4bye/TruckStuff036.jpg
http://i213.photobucket.com/albums/cc240/kot4bye/TruckStuff038.jpg

And it works great, winched my new CUCV onto the trailer last weekend.:D

WOW thats a tight squeeze!!! HAHAHa
Just realized I never posted my bumper...well here she is.

I dont have the winch on yet,I need to find someone with a welder to tack the bolts on.
So its harder to steal. And I have 4 more light tabs to weld on.
68782

My 2 babys :D What do ya think , should I trim the "fangs" up a little?

68783

And the lift/bumper finaly on after 2 months :eek1: I started june
15th and finished 2 weeks ago , LOL.
Had to get a new driveshaft , and Im still having problems.I need to shim the rear UP ,When
I hit the brakes Hard the D/S trys to bind up. :mad:

68784

very nice bumpers

Thanks for the pics and props as usual everyone!

But, these bumpers are no longer being produced :(................................................ .................................................. .................................................. .................................................. .................................................. .....................................


































In HREW




















DOM is now standard!

Does that mean the price has gone up?:confused:

Yep!

Still less than DOM option was before.

LOOK IN AUG FOUR WHEELER we have an add for this bumper.

Check it out Ward!

Jesse

"quote"Thanks for the pics and props as usual everyone!

But, these bumpers are no longer being produced :(............."

You scared the crap outa me! Held my Breath as I scrolled down the post. I should be ordering one soon, probably after the first of the year. Been looking at them for over a year now, just trying to decide where I want my light tabs (and saving money)

That's a pretty good write-up Jesse. Was that basically a press release type of thing you did or did they actually get one and try it out?

Just a press release. We actually have one going on a project truck in the mag too!

Just a press release. We actually have one going on a project truck in the mag too!


What, no details?:D Tell us about this truck! Now!

When I find out more I will let you guys know.

But for now there is room for more orders!

Bump for a great product, and great vendor!

Can't wait to see the project truck!

Couple more sent out yesterday!

Lead time down to 1 week!

Thanks again

jesse, i finally got a good pic of the bumper on my truck, figure id post it up for ya:D bumper sure is sweet!

Looks good Buddy!

Keep those orders coming in 2009! Don't forget we do custom orders, if you want something different than the production models just ask.

Jesse

wow that rear bumper is outstanding my friend! I don't even have the burban yet but I do know what rear bumper I want for it.

also if the burban I buy had the tailgate rear instead of barn doors and I need to go pick up long material or something and had to drive w/ the tailgate down....I would be able to disengage the rear tire carrier and remove for situations like that?

Yes sir the rear swing down carrier is completely removeable if desired. Sounds like a nice burb you are looking at. Give us another call if you have more questions!

Jesse

more pics

http://i163.photobucket.com/albums/t287/Blazenoffroad/IMG_0899.jpg

http://i163.photobucket.com/albums/t287/Blazenoffroad/IMG_0930.jpg

http://i163.photobucket.com/albums/t287/Blazenoffroad/IMG_0932.jpg

me likes!! Having issues deciding tube bumper or that one.

I gotta talk my boss into letting me get one of those for my '99 3500 work van. I may have to go "deer hunting" first to prove my point:eek1::D.

Front bumpers in STOCK!

Tax time is coming!!!!

10%-15% off with tax return sale.

Here are a couple pics of the BOR bumper installed. I like!
http://i202.photobucket.com/albums/aa191/cytochromeP450/DSCN1745.jpg

http://i202.photobucket.com/albums/aa191/cytochromeP450/DSCN1746.jpg

Ya baby! :)

I got mine on Tues. Finally got it painted and installed today. I gotta say Jesse, You da man!! This thing is beefy as all hell, looks bad to the ass (in Rustoleum Satin Black), and fit like a glove. And thanks for working with me on the winch plate. The 5721 just dropped right in perfect. Definitely a top notch product from an outstanding vendor. Thanks again.

Josh

Right on buddy! Wheres those pics at.....


Jesse

How much for the Heavy Duty winch bumper to 77340?

Front View
http://i289.photobucket.com/albums/ll204/brodieman316/Front.jpg

Side View
http://i289.photobucket.com/albums/ll204/brodieman316/Side.jpg

You'll have to take my word for it that the winch fits.. It doesn't have a motor or cable on it right now so all I did was a test fit.

Do you have any plans to offer tire carriers (like tire gate) for the older Chevy trucks? I need a place to secure my spare so that when I'm wheeling it won't have a chance to come out of the back of the truck. I contacted tire gate but they cater to the newer truck crowd. I'm looking for something like this http://www.tiregate.com/prerunner_0.shtml if possible. Thanks

We have done a few carriers similar to the gates but they were mounted into the exo cages on toyotas. It is doable but having a tailgate is also nice.

The HD fornt bumpers are $750 plus $134 to TX minus discount 10% $75
$809 delivered!

Jesse

Another one bites the dust.

Two more going out tomorrow!

how much would it cost to ship that front bumper to 93551 not the HD but the regular one. also approx. how much does the bumper weigh? Thanks

I have his front tube bumper. It seems like it weighs about 125 lbs. or so. You'll need a buddy to help you put it on. Also a come along will help to pull the frame together so it will go on a lot easier. I had to use a sledge hammer to smack the ends of the frame into submission. Only later did I come up with the come along idea.

Not every one needs squeezed , mine slid right in. And it does take 2+ guys to get it to line up easy.

I didn't have to adjust anything for mine. I just had my wife put a drift pin on either side and a bolt through one hole. The rest was all me. Not that bad to do.

My frame may have been tweaked or something. Anyway, it's on there now and tougher than a two dollar steak!

mmmmm $2 steak :)

Mine went on so easy. I lifted it in place by myself, and let it hang on the frame rails. The bolt holes lined up perfect. A couple light taps with a hammer, and they went right in!

Still loving my tube bumper!!!

Mine went on so easy. I lifted it in place by myself, and let it hang on the frame rails. The bolt holes lined up perfect. A couple light taps with a hammer, and they went right in!

Still loving my tube bumper!!!

Now that you say that, that's pretty much how mine went on. I guess it was as tough as a $20 petit filet mignon.:D

How about a "free" venison backstrap! Though my wife says the license fee, cost of camo, ammo, and hunting implements kinda kill the "free" thing!:haha:

This post is making me hungry now

Good to see how everyone has twisted around my two dollar steak reference. I see we have a lot of clowns on this forum.:haha:

HEY, you made it in the new Peterson's


Here are a couple pics of the BOR bumper installed. I like!
http://i202.photobucket.com/albums/aa191/cytochromeP450/DSCN1745.jpg

http://i202.photobucket.com/albums/aa191/cytochromeP450/DSCN1746.jpg

Cool. Truck no longer looks like this though.

verry nice

There is a bumper up for EBAY / Treadlightly charity auction right now, ends June 11th

http://cgi.ebay.com/ebaymotors/Chevy-Front-Tube-Winch-Bumper-from-Blazen-Off-road_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q 7c39Q3a1Q7c72Q3a1205Q7c240Q3a1318Q7c301Q3a1Q7c293Q 3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZite m27a9073480QQitemZ170339546240QQptZMotorsQ5fCarQ5f TruckQ5fPartsQ5fAccessories

We finally have pics of the bumper B_to_C won in Jesse's give-away a year ago. B_to_C has been busy finishing his MBA, so we only just got it installed.

http://i5.photobucket.com/albums/y177/MrK5/Nick%20Projects/DSCF1981.jpg

http://i5.photobucket.com/albums/y177/MrK5/Nick%20Projects/DSCF1984.jpg

http://i5.photobucket.com/albums/y177/MrK5/Nick%20Projects/DSCF1986.jpg