CK5 - The Full-Size GM Off Road Community

I need to get rid of this stuff. I have a lot of good stuff cheap :
1) Pair of hood hinges w/ springs $10

2) Fan shroud off 88 K5 Blazer ( has one tiny hole in bottom part of shroud) $15

3) Misc weatherstrip for windshield, 1/4 glass for Suburban $5 ea

4) Pair of metal headlight bezels (some pitting) $10 pr.

5) pair of plastic chrome plated Headlight bezels (very good shape) $15pr.

6) Battery tray from 1980 Suburban ( should fit 73-80) $15

7) (2) grills (1) Black ( spray painted) from 79' truck (2) gray grill off 1980 $20 ea.

8) class 3 hitch for 73-91 Suburban/ Blazer/ JImmy $20

9) (2) stock gauge clusters (one from 1988 other from 1980) $10 ea.

10) Alpine Cass. player AM/FM stereo (pull out) $25

12) Burgundy center console $20

13) Burgundy bucket seats from mid 80's-early 90's Suburban/Blazer driver side is power $30 pr.

14) Gas tank for Fleetside P/U $25

15) (2) non tilt steering columns with key $20 ea.

16) (2) complete doors ( afternmarket) minus lock cylinder $60 ea.(sale pending)

17) (2) fenders (aftermarket) 1973-80 $30 driver side $30 for pass. side (has minor scrape)

18) (2) 1973-80 radiator supports $30 ea.

19) 81-87 stock hood $25

20) 12 bolt 6 lug 4x4 rear (open diff) 3.07 gears $40

21) T-400 (4x4) cracked case (good internals) $40

22) 2 pc. driveshaft for 2WD (fits T-400 w/ 12 bolt rear) $30

23) T-400 (2WD) 85k miles $100

24) Newer Torque converter for T-400 $40

25) Pair of Suburban 1/4 glass w/ aftermarket tint $30 pr.

26) Pair of 8 leaf 3/4 ton leaf springs $50 pair

27) (1) stock air cleaner assembly (off of 90 Suburban w/ TBI) $15

28) (2) chrome drop base edelcrock air cleaners 14" (minor surface rust) $10 ea.


30) (1) aftermarket trans cooler $25

31) Fly wheel for 87-up SBC with 1pc. seal (come with bolts ) $20

32) starter for 1987-up SBC $20 (sale pending)

33) chrome center bolt valve covers(some surface rust) $20pr.

34) 3 core radiator fits 73-87 P/U and 73-91 Blazer/ Suburban $25

35) Brand new in box class 4 hitch fits 1973-87 P/U $100

36) rear driveshaft for 3/4 ton Suburban and P/U with NP 205 and 14 bolt rear $30

37) A/C box from 80 Suburban $30

38) (2) pair of windshield wipers $10 pr.(1 pr. black, 1 pr. stainless)

39) Burgundy seat belts (pair) for P/U $20 pr.

40) Sliding rear glass for P/U with weatherstrip (no inside locking clasp)$30

41) (2) P/U bed tool boxes (1) standard size w/ flip up doors $30 (no keys) (2) oversize box with hydraulic lift shocks (need to be replaced) can fit a fullsize floor jack in it very nice shape $60

Have pics. Make offers parts must go. Send email address if you want to see pics/ Located in Trenton,NJ (609) 481-8811

got pics of the aftermarket tranny cooler? does it come with this stuff needed for installation?

Got pics of the 2wd steering box? Does it have any leaks?

Steering box doesn't leak. I have the locking plastic tabs to hold it to the radiator. I don't know if I have the fittings for the radiator to where the hoses clamp to but I do have the rubber hoses as well. The coler was only used a couple months before I sold the truck it was on.

need your email address to send pics.

got any inner fenders?

no inner fenders

for the aftermarket doors, is it just for the shells, or is it complete?

pics of 33,19,30,13,11

email addy is bigblaze433@aol.com

Doors are complete. Have windows, tracks and handles. Just need lock cylinders. pics will be sent shortly.

Pics sent.

Interested in 2wd steering box if still available. Any idea of shipping to 30188?

38) 2 pair of windshield wipers $10 pr.

Is this the arms or just the blades? I need arms. Shipping to 77073?

if I was to guess I'd say $25-30 to ship to Ga.

pm sent regarding steering box

i think i might want the valve covers

How about a set of gas tank brackets and straps?? to zip 18707

It's an 87 SWB 2wd 16 gal tank but any strap from 73-87 pickup should work.

bob

I do have the straps and brackets. $20 plus shipping. I even have the bolts to bolt the brackets to the frame.

Let me know on the valve covers and I'll get a shipping price. In reference to the wipers it is the whole arm for both sides.

Let me know shipping on the wiper arms to 77073 and I can paypal or mo. thanks

PM sent

2) Fan shroud off 88 K5 Blazer ( has one tiny hole in bottom part of shroud) $20
What motor/radiator was in the truck?

4) Pair of metal headlight bezels (some pitting) $20 pr.
What year?

5) pair of plastic chrome plated Headlight bezels (very good shape) $20pr.
What year

8) class 3 hitch for 73-91 Suburban/ Blazer/ JImmy $35
Not the same for pickup/suburban/k5... I think the pickup and K5 are interchangeable but the burb is different

10) Alpine Cass. player AM/FM stereo (pull out) $40
Shaft mount or DIN?

15) (2) non tilt steering columns with key $30 ea.
What year?

35) Brand new in box class 4 hitch fits 1973-87 P/U $100
What is the weight rating?

36) rear driveshaft for 3/4 ton Suburban and P/U with NP 205 and 14 bolt rear $30
If this has 1350 ujoints on both ends and is a non center bearing style check shipping to 98294 please.

Kenny W. I will try to answer all of your questions.First The 88 K5 had a 350 with a 3 core radiator.2) The metal headlight bezels came off of an 80 with round headlights so it should be interchangeable w/ all 73-80 trucks. The plastic bezels came off a 79. Same application as the metal ones.The class 3 hitch will fit on Blazers and Jimmys.The Apline stereo i don't know the difference b/t DIN and shaft mounted. If you can tell me the difference I will try to find out. The steering columns one came out of an 88 K5 Blazer the other came out of an 80 Suburban,The class 4 hitch I'll have to get back to you on the weight rating and I am not sure what 1350 u joints are . It is a one piece driveshaft with no center bearing. The u joints are the common ones that come on most RWD cars and trucks with the little needle bearings inside the cap.Hpope this answers all your questions. As far as shipping goes I will not be able to get you a quote until I get back from vacation on Mon July 24.

Going on vacation until next saturday. I will check all PM's and emails and get back to everybody then.Thanks

Would like some pictures of these and price on shipping to 51301 business

2) Burgundy center console $25

13) Burgundy bucket seats from mid 80's-early 90's Suburban/Blazer driver side is power $75 pr.

Thanks,
Brett

When you get back I'll need you to measure the u-joint cap diameter and width across the caps then... we can figure out which size joint it is that way.

kenny I'll do it tonight and post the measurements. Stomper I sent you an email.

dp,

Sorry, I just figured out I have a bunk email addy in my profile:o....It's all fixed now if you could send it again I'd appreciate it:D

Thanks,

Stomper I don't know how to attach pics from the website to email you . I need the actual address so I can send them.

bnelsman at yahoo

stomper pics sent

prices have been lowered.

Prices have been lowered for last time. Get this stuff outta here.Lots of good stuff dirt cheap.Don't really feel like bringing all this stuff to swap meet.

could i get pics of these if they are still for sale. email is crash@esinc.net

2) Fan shroud off 88 K5 Blazer ( has one tiny hole in bottom part of shroud) $15

16) (2) complete doors ( afternmarket) minus lock cylinder $75 ea.

17) (2) fenders (aftermarket) 1973-80 $40 driver side $30 for pass. side (has minor scrape)

20) 12 bolt 6 lug 4x4 rear (open diff) 3.07 gears $40

27) (1) stock air cleaner assembly (off of 90 Suburban w/ TBI) $15

Before I send you all these pics.Are you planning to pick this stuff up? I am not shipping anything except the air cleaner and fan shroud.

36) rear driveshaft for 3/4 ton Suburban and P/U with NP 205 and 14 bolt rear $30
If this has 1350 ujoints on both ends and is a non center bearing style check shipping to 98294 please.

Could you get me pics of the driveshaft and dimensions on the u-joints? Width of the joint and diameter of the cap? Check to see if both ends of the shaft are the same.

The driveshaft is missing the slip yoke.Just to let you know. It is the shaft only.

Before I send you all these pics.Are you planning to pick this stuff up? I am not shipping anything except the air cleaner and fan shroud.


ok just send the pics of the stuff you can ship.


thanks
Dudley

If you are looking just for the U-joints then you might want to look elsewhere. Mine are missing the caps on both ends.I'll send you a pic anyway.Pic of the air cleaner and shroud coming too.Thanks

Measurements on the U-joints are approx 3 3/4" wide and diameter of cap is 1 5/16. Need your email address can't send pics thru the website.

What I want is the ends of the shaft... guess your missing the slip yoke end though so just the yoke that goes at the axle end. Do you have a chop saw by any chance? Willing to cut off the end and ship just the yoke?

I don't have a chop saw. If I did cut off the end I'd still charge you for the whole shaft just because it would be useless after I cut it up. If i locate one I'll let you know.

I'd pay $30 plus shipping for the two ends even missing the slip if you were able to cut out the extra tube to save on shipping. Chop saw, band saw, even a torch would work... just leave about 2" of tube beyond the weld and I can clean it up here with my chop saw.

I have a friend with a torch and chop. saw. I actually have to go up to his shop to buy a torque converter off of him so I can probably have him cut it with his torch at time. If you definately ant it let me know so we can work out the shipping details and I'll try to get to his shop by the middle to end of next week.Thanks

Prices dropped again.Must go. Selling house gotta clean out the garage.

still have tranny cooler?

Yes I still have the trans. cooler.