CK5 - The Full-Size GM Off Road Community

I have more stuff, but this is to get us going...

- Flex a lite dual Fan $250
- (2) Corbeau Baja SS Grey Vinyl seats - SOLD
- (2) RJS five point harness Black - sold
- 25 gallon gas tank with internal baffles - Less than 200 gallons run through it. - $50
- New 4 core radiator - sold
- Strong running TPI Engine with harness and sensors - SOLD
- Front Smittybuilt tube bumper - $100
- Front CUCV military Bumper - $100
- Rear stock bumper - sold
- Family Cage - SOLD
- Brand new till in box D60 Inner seals SOLD
- SM465/NP 205 - $400
- Front and rear drive shafts (Coast Drive Line) $50 each
- 1973 Pre smog tub, frame, and Vin - SOLD
- Manual Clutch assembly, including frame bracket and z-bar, bell housing, clutch and flywheel $200
- 35x15.5x15 TSL SX Tires (see thread)
- Brand New U-Joint - The big one for the back - $20
- Shackles (different sizes) $10 a pair for the regular ones and $25 for the bg ones
- Custom Winch Mount Bumper - $50

This stuff has to go, make me an offer.

I'd like the harnessess. PM sent.

ill be first in line on the seats pending pics and shipping to 23237

he put no shipping on the post
































































made you look sucka :D

PM Sent on the Harness.

I will snap pics of the seats tonight and weight them to get a cost on shipping.

What are the dimensions on the radiator? Was it in a CUCV?

Here is a picture of the seat and 4 35x15.5x15 SX tires for sale (these things are almost new $800obo)

seats look good now just find out shipping..that will either make or break the deal...do the sliders and all coem with the seats??

When you buy the seats, Corbeau makes you buy the sliders separately, but I was going to include them, didn't seem right to do it any other way...The best I can find is about $60 if I stick both in the same box and send them Fed Ex ground.

i just bought a bunch of stuff for my 60 friday...gimme a few days for my credit card to clear everything and i will let you know...

next in line for the seats

Also got a flex a lite fan model 292 for $250...fits my radiator which is 33 (28 at the core) by 18.

thats a nice piece right there to bad all my money will be going towards the seats :(

im out...to much going on right now to get theese seats...if you still have them when i get my tax return ill hit ya back up....

NOAH, I'm local and will take the seats. I'm in Northridge.

I sent a PM asking for payment info...no response yet, just wanted to make sure you didn't miss it. I wish I could take that fan off your hands as well.


Peronsally, I think the seats are a steal. I paid about 420 for my two seats, exact same, in black with shipping and sliders. I just hope people really how good of a deal that is.

it is a deal and i wish i had the money..i need stuff for my front axle more than seats right now...

sell your axle & get the seats...lol...

Noah does the front bumper come with the cradle for a winch?

If no one is doing anything about those seats ill take them .... im local and can pick them up ANYTIME

_matt

ttt...lots of stuff

Any pictures of the bumpers? Shipping would probably kill the deal anyway though.

Let's talk about the fan setup. Do you still have the complete control including the thermister ( temp switch ) The control module appears to be mounted on the fan housing.

Shipping the bumpers would likely be a lot of money, but if you really want them I will try to weigh them and get pricing.

As for the fans, I only have the fans. I ran them off a switch and kept them on except for in the morning on the freeway.

do you have pics of the front bumpers? funny thing is I was supposed to take a family trip to santa barbara this weekend. but both kids got sick.
-louie

I'll take pics tomorrow, but one is a standard CUCV, till painted Camo and the other is a smitty built, you can see it here...

http://www.cardomain.com/ride/2210274

did you ever sell the seats???

Do you still have the tires? If so how much?

OK, I am late on the pictures of the bumpers, but one is a standard CUCV and one is a black smittybuilt.

As for the tires, I still have the SX tires...650obo

you have been pm'd

Also interested in the front cucv bumper. Im looking for one for the blazer. If its intact with the brushguard, mounts and shackles ill take it. Ill even pay for shipping.

That is unless someone else before me who requested it would also pay for shipping :)

Here is what the tank looks like (obviously a stock photo, but that's what they look like). I just got home, too dark to take pics, but I should be home earlier tomorrow. Sorry for the delay, but been a looong day.
The CUCV bumber has the brush gauar and frame rail mounts, but not the shackle mounts.

just bought those so i guess that wont be a problem. i wanted the shackles for the rear though. of course if anyone else is willing to ship it i wont get it so ill worry about it if i get it. :) picture of the cucv bumper available?

Here are the bumpers, the gas tank and a picture of the RJS harnesses...although mine are black, not red.

as long as no one wants it and you got the mounting brackets im really into that cucv bumper, if i could just see a picture of the front please? :)

If you look through the pics at the bottom of my page you will see the bumper because it used to be mine:D.

does anyone ahead of me still want the bumper?

harnesses still around?

I sitll have the harnesses

will you ship?

Hi,

I will ship, you pay the shipping...

alright, no one said anything. How much for shipping of the bumper, brackets and shackles to 11720?

I have the bumper, brushguard and frame mounts, but no shackles.

thats fine

Noah I still want the crossmember if you still have it. let me know.

Ill give you $60 for the harnesses at socko?

These fans are awesome, seriously, no one wants a 465/205? I have a clutch flywheel and cluthc assembly.

Are the seats gone yet? How much?

Seats are sold, sorry.

How much to ship radiator to zip 66725?

Thanks,

Jason

is the cucv front bumper sold? if not could i get a quote to pittsburgh pa 15210?

whats the model # of the fan? thanks

I've looked all over the fans and can't find a model number...I found a motor number so will try to figure out the model number form there. I do know they kept the engine plenty of cool...

thanks. if all else fails. what are the measurments?
are the fans side by side or offset?
does it have the thermostsat controls or is it manual controls?

thanks

Hi,

I am a little slow today, I guess. Look at the 2nd page of this thread for a picture and model number. I do not have a thermastat for the fans, I ran them off a manual switch so I could turn them off for water crossings etc...

How much for the tank shipped to 33175? Do you still have the straps and skid plate? Do you know if a sender from a sadle tank work with that tank?

I have a sending unti for that tank, but no straps or skid plate. Still interested?

Is the sending unit for a carb or tbi truck? Would you be willing to ship to 33175?

Updates the items for sale on the first page...here are some pics.

Do you have the rear drive shaft? if so can I get some measurements pushed in and pulled out.Maybe a pic??

Thanks mike

Pushed in is 40.5, I'll measure the extended lngth tomorrow. That thing has about 500 miles on it and brand new u-joints...cost a lot more than what I am selling it for...

Awesome winch bumper....

Hey Noah how are you doing? Does that rear driveshaft have a cv and are they 1350? I can't see the top of the rear driveshaft. How much also?

Ernie

And i was in S.B. this afternoon:doah::doah:.

Got a 35" tire on a 6 lug rim? I'll trade ya...

Pushed in is 40.5, I'll measure the extended lngth tomorrow. That thing has about 500 miles on it and brand new u-joints...cost a lot more than what I am selling it for...


Pm sent

if so can I get some measurements pushed in and pulled out.Maybe a pic??

Thanks mike

thats weird:o




how much for the winch bumper Noah.

thats weird:o




how much for the winch bumper Noah.

now that I look at you are right:crazy: :eek1:

Mike

$50 for the bumper...dang the metal cost that...

Noah does the rear driveshaft have a cv at the end? I can't see from the pictures. Did you ever measure it extended?

Hey man, no and no, but I will...

41" extended...with 3 inches of "shaft" exposed...no wonder they always laught at me:crazy:

I also have a rear bench seat for sale...

and a manual clutch bellhousing and brake pedals.

ttt