CK5 - The Full-Size GM Off Road Community

80 K20 4x4. Has about 40K on Tonawanda 454. 4spd/205. 6" lift,35" tires on 16.5" alluminum rims. Tires aren't super. Body is rough but would make a great wheeling rig.

$1200obo


Edit: needs a throughout bearing. Just forgot to mention that.

Pics?

Here's a couple pic's of it.

this is exactly what i am looking for. To bad it is not in nor cali. :(

$1000

would it make a trip to pa? 10B front and 14BFF rear? hows the rust on the cab and is it a block lift or all spring lift? will the truck still move even though it needs a throwout bearing? wheres the worst of the rust at and hows the body mounts?

10bolt front, 14FF rear. Cab is fairly rusty. Lift blocks in the rear. I haven't driven it since the throwout bearing went bad. It belongs to my buddys brother and he's trading it to me for a 2wd truck I have that will get him back and forth to work on lesss fuel till he can afford a new one. Apparently he doesn't want to fix the bearing,which is what I'd do.
Not sure I'd drive it 2000mi. It's plenty reliable I think but I personally wouldn't drive a 28yr old truck that far.For one a big block isn't going to get more than about 14mpg on a good day. Just my openion though.


would it make a trip to pa? 10B front and 14BFF rear? hows the rust on the cab and is it a block lift or all spring lift? will the truck still move even though it needs a throwout bearing? wheres the worst of the rust at and hows the body mounts?

where in Nebraska are you?? thanks

im interested but shipping it would be a pain thats why i was wondering if it was driveable. x2 on where in nebraska are you?

I'm in western NE,about 120mi from the Wyo border.

what town?

Don't live in town :haha:. South of Gordon. I could possible get it farther east in need be.

what town?

how far east could you get it? Im in Sikeston MO

I've forgotten where Sikeston is. It in Central MO? I'm sure I can get it as far as Broken Bow, NE.

its in southeast mo.

If someone wanted a cool project I'll include a crew cab and clip and a 5' flatbed for an extra $750. That would make a perfect crew short bed wheeling rig.

I had it sold but the guy never showed up so here it it again.

Was somewhat interested in the truck due to location. Very interested in the crew cab. Is it a whole truck or just cab? 4wd? I think i'm just a few hours nw of you so driving down with a trailer would be doable. i've been busy with the weather but drop me an email or reply on this thread.

thanks
mike

I was just listing the cab off the crew cab. I still have the truck semi together but no drivetrain in it. Just axles under it. D60/14bolt with posi. They are pending sale but not sold for sure.

I'm south of Gordon.

Was somewhat interested in the truck due to location. Very interested in the crew cab. Is it a whole truck or just cab? 4wd? I think i'm just a few hours nw of you so driving down with a trailer would be doable. i've been busy with the weather but drop me an email or reply on this thread.

thanks
mike

any pics? what do you want for whats left of it? i have a motor trans t case. i'm looking for it to have frame, cab ,axles and maybe a title.


edit:found it under axles section. hard to tell from the pics are the rockers damaged or just the doors and does it have a box or flatbed or nothing behind cab?

Rockers are strait. There is I believe 2 small spots where it's starting to get some rust but nothing major yet. Has a box.
No title. That's why I was parting it. I can get more pic's. Was a diesel.

any pics? what do you want for whats left of it? i have a motor trans t case. i'm looking for it to have frame, cab ,axles and maybe a title.


edit:found it under axles section. hard to tell from the pics are the rockers damaged or just the doors and does it have a box or flatbed or nothing behind cab?

i'll wait and see. I'm looking for a complete crew to replace my reg cab work truck.It looks like your getting some pretty good action on the axles in that section.i'll be checking on it but i would really like a whole truck running and driveable but...I may have to build what i want or settle on a newer body style.Good Luck and you can call me if those trucks just wont sell.
thanks
mike
6055912912

I know where at least one and maybe 2 crew cabs that are pretty decent. One already has dibs on it so I won't say much about it but the other one needs a frame or the frame horns straitened. It's an 87 or 88 with a TBI 454/4spd/205. Silverado package so it has everything. I believe it only had like 80K origonal miles.

i'll wait and see. I'm looking for a complete crew to replace my reg cab work truck.It looks like your getting some pretty good action on the axles in that section.i'll be checking on it but i would really like a whole truck running and driveable but...I may have to build what i want or settle on a newer body style.Good Luck and you can call me if those trucks just wont sell.
thanks
mike
6055912912

I don't want to mess with frame damage. I would rather yours if the frame is straight.What's up with no title? did you buy it off a guy in White Clay for beer money:haha:I have a few reg cab parts trucks that might work for registration. Is that 89 pretty much complete except for a motor. I just can't find any old body style crew cabs around here. I really don't want to travel to AZ or CA to get one either. but i am patient soo...we shall see

This one didn't come from there :haha:. I actually have a title for an 83 crew cab I bought on the Res that was trashed. I don't know why this one doesn't have a title. I found registrations in the glove box till 06 I believe. It's plated for 06. I bought it from a salvage yard for the axles cause I thought my buddy wanted them. Then he fell onto tough times :(. I have a good crew cab frame too. Ya could buy the one with frame damage and swap. Everyone has tons of free time right :haha::rolleyes: .
I just saw one sitting in the weeds the other day but at the moment I can't recal where it was. I'll find more I'm sure.

You ahve any 78 or 79 F250 or F350 4x4's up there? Need a couple with D60 fronts.

I don't want to mess with frame damage. I would rather yours if the frame is straight.What's up with no title? did you buy it off a guy in White Clay for beer money:haha:I have a few reg cab parts trucks that might work for registration. Is that 89 pretty much complete except for a motor. I just can't find any old body style crew cabs around here. I really don't want to travel to AZ or CA to get one either. but i am patient soo...we shall see

$900 anyone??

Need this out of here.