CK5 - The Full-Size GM Off Road Community

Ok, I want disk brakes. I know i need the master cylinder, prop valve and booster. Im just going to get the whole axle to make it easier. Someone suggested I use an axle out of a later truck because the U-joints or knuckles were bigger or somethin like that. What year range am I looking at? I want it to have the same spring and shock locations and dont want a 10 bolt. Any Help would be great. Thanks.

Evan

Any D44 '73 and later would be good b/c it has the 297-X axle joints. The pre-'73 D44s have smaller 260-X axle joints from what I understand. The spring pads and shock mounts are the same as your current axle.

Will

How do I make sure I dont get a 10 bolt axle? Did certain trucks have 10 bolts and others have dana 44's? Thanks for your help.

Evan

The easy way to tell a 10B from a D44 is the cover. This will show you what to look for http://coloradok5.com/axleguide.shtml
Also I think the last year for D44's was 78

Whats wrong with 10 bolts? They are just as strong as a dana 44 and its easier to find parts for the 10 bolts.

Dan

There is nothin wrong with 10 bolts. I just have a place where I have access to very cheap Dana 44 parts. And I already have some new parts on my 44 that I would like to transfer over.

Evan

okay, then you want to pick one up from a second gen blazer then.

Correct. For the larger U-Joints and what not.