CK5 - The Full-Size GM Off Road Community

Set of 4 stock rallies with center caps, nice shape, no rust, no shipping 30.00

double hump heads, will need a full rebuild, small valve version, don't know much about them, got them in a trade, 50.00

Front driveshaft off of 79 K20 great shape 50.00

Rear driveshaft off of 79 K20, I've been told this is an odd ball driveshaft since it has a 1350 joint on one end and a 1310 joint on the slip end. Decent shape will need u-joints. 50.00

sbc 350 heads, nothing special came off a running truck a few years ago and have been sitting around. FREE

sbc 350 short block, was a running motor when torn down to freshen up. Never got back to it. I believe its a 2 bolt and is currently bored to .040 If your interested I'll get better details. 50.00 you pick up.

front air dam - with or without tow hook cutouts? and shipping to 24441 thanks

It has the tow hook cut outs. And it has a couple of scratches in the middle front but nothing to bad, still looks good! I'll check on the shipping, It doesn't weigh much but it is long. I'll check and get back to ya. /forums/images/graemlins/thumb.gif

Shipping will be about 12.00 due to length. Let me know. Thanks

[ QUOTE ]
Set of 4 stock rallies with center caps, nice shape, no rust, no shipping 50.00

[/ QUOTE ]
6 lug or 8 lug? I'm not even sure if they were available as 8 lug but that is what I am looking for.

Where at in IL? It is a pretty big state /forums/images/graemlins/wink.gif

There six lug, I'm near Kankakee. /forums/images/graemlins/thumb.gif

That's not a bad price but I'm looking for one without the tow hook cutouts unless of course you might have some tow hooks for sale too. /forums/images/graemlins/rotfl.gif /forums/images/graemlins/rotfl.gif

ttt /forums/images/graemlins/thumb.gif

Post the Camel Hump head numbers and see what info you can find. Some of those can get some $$$. Even small valve ones

Back to the top. /forums/images/graemlins/grin.gif

what are the chances you have the shifter on down to shift rails? i need the set up, even if you only have curtain parts of that let me know which ones exactly.

No shifter, Just the shift rails that are in the case that extend out of the case a couple of inches.

Bump /forums/images/graemlins/thumb.gif

roll pan pics and price to 84116 business address

Hey there, will you ship that NP205 if I pay for your time and shipping? It is a shippable item. Either that, or you could go wheeling with us sometime and bring it. What do you think? I need to start building a spare for my truck and that might help me get started. /forums/images/graemlins/thumb.gif

http://coloradok5.com/photos/data/500/3030P6250075_1_.JPG I did a a quick check at the ups site and it said due to the length it would be like 25.00 for shipping. My zip is 60954 if you want to look.

Hey Mudzer, my zip is 60954 if you want to due some checking. But if anyone is planning a wheelin trip in the near future and we both go, throwing it in would be no problem. /forums/images/graemlins/thumb.gif

Do you have any idea of the weight of this case? Grab the bathroom scale and give me a rough estimation. I will add some poundage and go from there. I appreciate you working with me on this.

if that is for a fleetside I want it. PM me your address and I will send the fundage thanks.

Sorry about that Mudzer, I just weighed it and its about 70 lbs.

alf4444, you have a pm /forums/images/graemlins/thumb.gif

More added.

would you be intrested in shipping the 400 crank and rods to 71202. ill take care of shipping and your trouble.

If he doesn't want the crank, I DO!!

Hey 69k5, I would rather not ship the heavy stuff, and this stuff would proabably cost quite a bit for shipping. Sorry getting back to you kinda late, I was on vacation.

I'm interested in the crank and rods! /forums/images/graemlins/thumb.gif I'll PM ya.

no prob. if ifgured that anyway but it never hurts to ask. /forums/images/graemlins/grin.gif

List updated. Thanks

[ QUOTE ]
Rear driveshaft off of 79 K20, I've been told this is an odd ball driveshaft since it has a 1350 joint on one end and a 1310 joint on the slip end. Decent shape will need u-joints. 50.00

[/ QUOTE ]
Do you know what tranny/tcase combo this was used with? 1 or 2 piece driveshaft (2 u-joints or 3 u-joints & an carrier brg)?

The truck had a t400, 203 and was a regular cab long bed. The drive shaft is a 2 piece, as in it slides inside itself, not a slipyoke, with a u joint at each end. And as I said the ujoints are two different sizes. Hope I was clear enough? I can get a pic if needed also. Let me know.

Technically it is a 1 piece driveshaft as long as it doesn't use a carrier bearing and 2 seperate driveshafts /forums/images/graemlins/thumb.gif

But I would like a late 70's 3/4 ton driveshaft from a 4 spd/NP 205 combo now (at least that would be the easy route). Could you measure the compressed and extended lengths?

Compressed is 54 1/2 and extended is 57 3/4.

Thanks, is that the center to center on the u-joints? I will try to measure my truck and see if it will come close or not /forums/images/graemlins/thumb.gif

Sorry about that, yes its center to center of the u-joints.

[ QUOTE ]
Hey 69k5, I would rather not ship the heavy stuff, and this stuff would proabably cost quite a bit for shipping. Sorry getting back to you kinda late, I was on vacation.

[/ QUOTE ]

What happened to the crank and rods? You wouldn't have to ship it, I'd come down and get it.

They where picked up.