CK5 - The Full-Size GM Off Road Community

TBI setup from a 93 K1500 with a 350...comes with complete wiring harness includes all engine bay wiring and wiring back to the fuel tank, sending unit, TB, distributor, intake, some sensors, coil. I dont have the ECM, I didnt get if when I bought the setup.

I need the cash ASAP for another project $150 plus shipping

No ECM? Thats too bad! Had to read the post again... just wondered why it was so cheap @ $150! /forums/images/graemlins/thinking.gif I nearly bit on that one!

-Dan

I thought I had everything, but apparently it wasnt shipped to me when i bought the setup. I probably ought to just buy one, Ive seen the ECM on E-bay for less than $50.

will this tbi work with a 305? I plan to upgrade but right now i have an 85 with a 305. if it works i would seriously want to buy the setup.

I dont know why it wont. Ill put a post on the main board to find out.

If you want to use it on a 305, you can just buy the ECM for a 305 instead of a 350.

The 350 ECM will work fine too... the general rule that I have been told is that any GM ECM can be put onto a motor +/- 30% the original displacement! /forums/images/graemlins/thumb.gif Thats +/- 105cid! /forums/images/graemlins/eek.gif

-Dan

Cool, thanks for the info /forums/images/graemlins/thumb.gif

I will trade for front CV shafts (I need 2 or 3), 208 from behind a 700r4, 203 from behind a th350, or a 205 from behind a th400.

will this stuff work on an 87 (mostly the sender), but I need someother the other parts later on.
I should be making a trip to ILL soon, you take paypal?
too bad that bumpers already gone /forums/images/graemlins/angryfire.gif

Yes, it will work. I was planning to put it on my 86 but I just dont have the time or money. I need to the cash to get the trans and t-case back together. Yes I take Paypal if youll pay their extra charges. If nothing else, I may be coming to Champaign, IL on the 4th and 5th of July. Maybe we could meet somewhere.

I think I may have the 208 you need.... Will check the input splines and PM ya.

Cool, let me know.

I should be making a trip to ILL soon with 75-k5 so if you still have it we'll meet up then /forums/images/graemlins/thumb.gif
Do you happen to have tank straps for a 31 gal tank?

If it is for a 700r4, do you have the adapter?

No straps, I need to get some myself for when I get the 31 gal installed in my K10.

No good. Both of my 208's are 32 spliners...

I have an ECM with a 350 prom in it if you are intersted so you have a complete setup. It is from a 91 p/up. $60 plus shipping

OK, thanks anyways