CK5 - The Full-Size GM Off Road Community

I am getting ready to fab up some traction bars for the front and rear. I need some input on the best way to do this and the right way to do it. I dont want to take short cuts. The only kind of wheeling I do is up at the lakes for playing in the mud and the high desert for hill climbs and sand dunes. the only rocks around here are lava rocks and you do not want to do that unless you feel like buying tires. Any help would be cool.

Ok, make the bars as long as possible. If you dont you will increase the anitsquat in the rear and i believe antidrive in the front. Also make them beafy and keep the upper bar as close to being parellel to the ground as possible. Use a shackle at the end of the bar opposite of the diffs to allow for the bar to move forward and back as the suspension compresses and droops. if you can make the mounts in the axles above the the bottom of the axle to reduce your chances of hitting it one something and make sure the mounting points are beefy enough to withstand the forces. /forums/images/graemlins/thumb.gif

[ QUOTE ]
the only rocks around here are lava rocks and you do not want to do that unless you feel like buying tires

[/ QUOTE ]

I hear that. We have some good trails here but its all Lava too. Real hell on tires. /forums/images/graemlins/tongue.gif