700/208 to 465/208

[bryguy00b]

what would i need ot do this swap? i want to do the 465 swap..but might have ot keep my 208. will i need an adapter or something for the 465 to bolt up to the 208 if it didnt originally? i might be able to get a 465/205 from this guy..and might trade him the 700 from my blazer for his 465..

[doctor4x4]

u need every thing from my experience tranny tcase + drive shafts as its a 32 spline out put not a 27 spline that u cureently have

[tarussell]

If memory serves me correctly you will need:
The correct length long 465 out-put main shaft - 32 spline
The 465 to 208 adapter
and finally a 32 spline female input gear for the 208

If you do a search on T/C adapters you will find a picture of the correct adapter - there are atleast two versions - tall and short so get the correct cross member that fits your adapter.
Good luck , Tom