Aisin hubs

[Magnus88]

I have the oppurtunity to get some manual hubs from a Toyota Landcruiser. If it helps in any way to identify the year its a 5 cyl diesel. Im guessing mid 90's or so. The hubs are Aisin and my question is: does anybody have an idea weather they will be able to fit my front 10b? I havent actually seen the car or the hubs so this is sadly all the info ive got at this monent. [img]/forums/images/graemlins/blush.gif[/img]

I know i could get the Warn Premiums, but since money is really tight and these are for free i thought i could atleast give it a shot. [img]/forums/images/graemlins/1zhelp.gif[/img]

[Emmettology 101]

What axle is under the front of the LC? If it is a D44 then there is a good chance they will work...

Or you could get some new Superwinch, Warn standards or MM hubs for alot cheaper than the premiums!

[bigjbear]

This isn't going to be much help, but I have NEVER seen the Aisin (stock Toyota) hubs on a D44 or GM 10B. I doubt it will work.

[laketex]

nosir. I've rebuilt both, and the toyota design is totally different. The front end of a toyota landcruiser would be a 8" Toy.

[HarryH3]

They won't fit. [img]/forums/images/graemlins/frown.gif[/img] Toyota stuff is metric. I'm sure that the spline count, etc. would also be different. Post up in the "Part Wanted" forum. Someone may have a set of decent hubs that they would sell you cheap. [img]/forums/images/graemlins/cool.gif[/img]

[HarryH3]

Oops! I just noticed that you're in Sweeden. I guess that makes finding parts for GM trucks quite a challenge. [img]/forums/images/graemlins/eek.gif[/img]

[Confedneck]

aisin manual hubs wont fit a GM vehicle...the ones on my toyota were external hubs, with the whole body outside the wheel..and then the cover with the dial bolted to that, so no, they will not fit..

[Magnus88]

First of all, thank you guys. I never seizes to amaze me the amount of knowlege accumulated on this site. [img]/forums/images/graemlins/grin.gif[/img] To bad the hubs wont fit, but it was a longshot...

Finding new parts here for GM trucks is not to hard but if you compare the prices here to your (american) its way more expensive. Junkyards are not really a big option either since there isnt to many [img]/forums/images/graemlins/k5.gif[/img] to take there in the first place... [img]/forums/images/graemlins/frown.gif[/img]

[m j]

x